NEW from E6000!

NEW from E6000!

Posted by Rhinestones Unlimited on Sep 24th 2019


Two new glue offerings have arrived in our warehouse and we know you will be interested in these! E6000 PLUS with get this, NO ODOR! And, E6000 classic formulation with screw on precision tips!

E6000 Plus Glue - Odorless AdhesiveE6000 Glue - Precision Tips Adhesive

E6000 PLUS

E6000 PLUS offers virtually the same performance characteristics you love about E6000 but without the odor! It's formulated using a premium polymer technology and can be used on most any substrate and in just about any application. The waterproof formula and all-weather performance make E6000 PLUS ideal for indoor and outdoor applications. Excellent adhesion to wood, glass, fabric, ceramic, gems, metal, marble, fiberglass, concrete, most plastics, Lexan and much more.

  • No odor
  • Crystal clear
  • Superb UV resistance
  • Paintable
  • Remains flexible after curing
  • Maintains its permanent bond strength
  • Washer-dryer safe
  • Acid-free

E6000 PLUS INSTRUCTIONS FOR SAFE USE

Follow these step-by-step directions when using E6000 PLUS:

Read directions and test small area for adhesion before use. Surface should be clean, dry and free of dirt. For best adhesion on smooth, non-porous materials, lightly roughen surface before use. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

  1. Puncture seal in neck of tube using pointer cap.
  2. Apply directly to surfaces to be bonded or repaired. NOTE: For non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently.
  3. To close tube properly,remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed.
  4. Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.
  5. Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.
  6. Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. Store in a cool, dry place.

Tip: For quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive.

E6000 PLUS FAQS

How long does E6000 PLUS take to dry?
Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.

Can the cure time be sped up?
Yes, for quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive. Application on damp and wet surfaces may slightly affect adhesion.

How can E6000 PLUS be cleaned up?
Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.

What temperature is best to apply E6000 PLUS?Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

Is E6000 PLUS waterproof, UV resistant and washer/dryer safe?
Yes.

Can E6000 PLUS be painted over once cured?
Yes. Paintable on most brands/types of water-based paints. Test small area before use.

What is the best way to prolong the life of the unused product in the tube?
After use, remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed.

What materials can E6000 PLUS be used on?
Use on all your INDOOR / OUTDOOR DIY or craft projects requiring a permanent bond. EXCELLENT ADHESION TO: Wood, Glass, Fabric, Ceramic, Gems, Metals, Marble, Fiberglass, Concrete, most Plastics, Lexan, Plexiglass & much more!

What is the best way to clean-up E6000 PLUS?
Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.

Can E6000 PLUS be sanded?
Yes, E6000 PLUS sands easily. The cured adhesive sands off at different rates depending on grit of sandpaper. Carefully cut away as much cured excess as possible. Use the coarsest grit (example 60 or 80) sandpaper to eliminate the excess. Then, a finer grit (example over 200) sandpaper for finish work.

E6000 WITH PRECISION TIPS - NEW

Our best-selling adhesive is also available with precision tip applicators. These applicators are ideal for projects using small, delicate pieces that require greater accuracy. E6000 Precision Tip Adhesive gives you the control you need without the mess.

  • Includes 3 precision tips plus a precision tip cap
  • Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and much more
  • Dries clear
  • Photo safe
  • Washer/dryer safe
  • Paintable
  • Temperature resistant

E6000 WITH PRECISION TIPS INSTRUCTIONS FOR SAFE USE

Follow these step-by-step directions when using E6000:

Read directions and test small area before use.
1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2. Puncture seal in neck of tube using pointer cap. Replace cap. Screw precision tip into top of tube cap. Replace with fresh tip as needed.
3. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). However, fully cured adhesive can withstand temperatures from -40 to 180 ºF (-40 to 82 ºC) intermittently.
4. Apply directly to surfaces to be bonded or repaired.
5. Allow 24 hours for curing. Depending on materials and temperature, maximum bond strength may not be reached for up 48 to 72 hours.
6. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
7. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.

E6000 FAQS

What temperature range does E6000 withstand?
Amazing E6000 can be applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). When cured, E6000 can withstand temperatures between -40 °F and 180 °F (-40 °C to 82 °C).
Is E6000 UV resistant?
E6000 may be painted over for maximum UV resistance after it has cured.
Can E6000 be used on Styrofoam™?
No. E6000 is also not recommended for use on any polystyrene, polyethylene or polypropylene plastics.
Will E6000 crack or break under stress?
No, E6000 dries to a rubber-like consistency that is flexible and moves with adhered material.
Is E6000 washer/dryer safe?
Yes. E6000 will hold on substrates applied to fabrics that are put through the washer and dryer. Dry cleaning, however, is not recommended.
Is E6000 safe for photographs?
Yes. E6000 is photograph-safe after a full cure of 24 and 72 hours at 70 °F (21 °C).
How long does E6000 take to dry?
E6000 starts getting tacky in approximately 2 minutes and begins setting in approximately 10 minutes. A full cure takes between 24 and 72 hours.

Remember, temperature and humidity will affect dry time. To speed drying, apply heat using a handheld dryer set on low. Do not hold directly on E6000.
What is used to clean up uncured E6000?
Small amounts of acetone or citrus-based solvents for uncured E6000. Cured Amazing E6000 may be removed by cutting and scraping.