SUPERTITE Adhesives from Crystal Ninja

SUPERTITE Adhesives from Crystal Ninja

Posted by Rhinestones Unlimited on Oct 10th 2019

The Crystal Ninja is at it again!  Our friend Kellie DeFries is certainly the ninja of glue and tools for rhinestone application.  Recently Kellie partnered with Supertite and developed two new glues - the Ninja Super Flex and Ninja Super Grip adhesives.  These glues are not for fabric or textiles however they do work on leather, metal, plastic, rubber, and fingernails!  In addition to the Ninja Supertite glues, there are three other glues by Supertite that all work on fabric and textiles and come Ninja approved!  Check out this helpful glue chart and... 

SHOP SUPERTITE ADHESIVES

Supertite Multi-Grab 360° Adhesive

Supertite's new do-it all industrial contact cement, Multi-Grab 360° Adhesive, gives you unlimited adhesive bonding solutions for home repair, crafting and creating 24 hours a day!  Unbelievably strong, flexible, permanent and waterproof.  Passes the E.U. Chemical safety regulations (REACH) for consumer use!  Other solvent-based glues in USA cannot claim that!  The adhesive bonds to metal, glass, ceramic, stone, plastics (flexible and rigid), textiles, wood, paper, crystals and select foam building blocks and craft forms.

Supertite Multi-Grab 360° ADHESIVE INSTRUCTIONS FOR SAFE USE

Follow these step-by-step directions when using Supertite Multi-Grab 360° Adhesive:

  1. Protect work area from spills.  Clean, dry and roughen surfaces to be bonded in a well ventilated space.
  2. While holding the tube, twist open the cap counter-clockwise.  DO NOT HOLD TUBE TOWARDS FACE OR DOWNWARDS.
  3. Apply a small thin amount of Supertite Multi-Grab Adhesive to each of the surfaces to be bonded.  Wait 2 minutes, then press surfaces together and hold for 30 seconds.  Adjust as necessary if the bond is not in line.  The longer the open time, up to 10 minutes, the stronger the bond.  Allow 24 hours for cure time.
  4. Clean excess or uncured adhesive with a small amount of acetone.  

To keep your Supertite Multi-Grab 360° Adhesive working in top condition, wipe a small amount of petroleum jelly onto the cap threads on the nozzle and keep the cap screwed onto the nozzle as soon as the glue application is completed.  Keep in a dark, cool and dry place.

Supertite Glue-MultiGrab 360 Adhesive

Supertite Fabric Tack Adhesive

Supertite Fabric Tack Adhesive is an industrial strength textile adhesive.  Safe & Non-Toxic, it dries transparent and is washable and permanent.  This adhesive bonds to fabrics, textiles, synthetic materials, leather and embellishment projects!

Supertite Fabric Tack ADHESIVE INSTRUCTIONS FOR SAFE USE

  1. Clean and dry surfaces to be bonded.
  2. Gently hold tube upright and away from face, twist cap to open.  Close cap firmly after application for future us.
  3. Apply Supertite Fabic Tack Adhesive to one of the surfaces to be bonded.
  4. Press the two materials together with constant pressure for 30 seconds.
  5. Allow to dry for 1 hour.  Maximum resistance is reached after 12 hours.
  6. Use a damp cloth to clean up, before glue dries.  Store in a cool, dry place.

Key notes:  Keep from Freezing. Not to be used on items to be heated or submerged.  Do not Dry Clean.  Allow 3-5 days before washing.  Wash hands with soap and water after use.

Supertite Glue-Fabric Tack Adhesive

Supertite Fusion-Tack Adhesive 

Supertite Fusion-Tack Adhesive is an industrail strength textile adhesive.  It is safe and non-toxic.  It dries transparent and is washable and permanent and is solvent free!  This adhesive bonds to glass, crystal, metal, plastics, wood, fabrics, textiles, synthetic materials, leather and embellishment projects.

Supertite Fusion-Tack ADHESIVE INSTRUCTIONS FOR SAFE USE

  1. Clean and dry surfaces to be bonded.
  2. Gently hold tube upright and away from face, twist cap to open. Close cap firmly after application for future use.
  3. Apply Supertite Fusion-Tack Adhesive to one of the surfaces to be bonded.
  4. Press the two materials together with slight pressure until they are set in place.
  5. Allow to dry for 1 hour. Maximum resistance is reached after 12 hours.
  6. Use a damp cloth to clean up, before glue dries. Store in a cool, dry place.

Key notes: Keep from Freezing. Not to be used on items to be heated or submerged. Do Not Dry Clean.  Allow 3-5 days before washing. Wash hands with soap and water after use.

Supertite Glue-Fusion Tack Multi-Purpose Adhesive

Supertite Ninja SuperGrip Adhesive  

This adhesive bonds to crystals, glass, ceramics, metals, plastics, foam, rubber, wood, etc.

Supertite Ninja SuperGrip ADHESIVE INSTRUCTIONS FOR SAFE USE

  1. Protect work area from spills.  Clean and dry surfaces to be bonded.
  2. While gently holding the tube upright and away from eyes and body, screw on tightly the cap and nozzle assembly to puncture tube mouth.  Unscrew cap, leaving nozzle in place.
  3. Apply a small amount of Supertite Ninja SuperGrip to one of the surfaces.  Excess glue can cause a delayed or failed bonding of parts.  Press the two surfaces together for approximately 2-10 seconds (wait 24 hours for best results).
  4. To keep your Supertite glue working at full speed, clean nozzle with dry cloth, screw the cap back onto the nozzle.  Keep in a cool, dry place.

Bonded items should not be heated in an oven, microwave or dishwasher.

Supertite Glue-Ninja SuperGrip Adhesive

Supertite Ninja SuperFlex Adhesive

Ninja SuperFlex Adhesive is a gel-curing instant elastic 2-part adhesive.  Working time is 1 minute or less with a 5 minute cure time.  Once the bond has cured it becomes flexible and elastic with over 200x the flex.  Ideal for making or repairing parts that move relative to each other or need significant flex.  This product is a No Odor, Non-Irritant and Non-staining adhesive that is Foam Safe.  It bonds to rubber, metals, crystal/glass, plastics, leather, wood and seams and gap filing.  Allow 24 hours for full cure.

Supertite Ninja SuperFlex ADHESIVE INSTRUCTIONS FOR SAFE USE

  1. Apply directly to the surface for bonding and/or sealing.
  2. Gently press materials to be bonded together for 10 seconds and let bond set-up.  Do not over apply glue and do not press glue out of area to be bonded.  Less glue allows for better surface bond.
  3. Excess glue should be wiped up immediately with a dry cloth.

Supertite Glue-Ninja Flex Professional Adhesive